Copper sections

$0.00

USAGE

The copper sections are varied due to their special usage, however they are mainly used to make flat wires which are applicable in elec trical transformers. They are also used to make copper screws and rivets which are applicable in electrical industries.
Category:
Description

DIMENSIONS

The copper and copper-alloy sections are offered in varied dimensions.

Round Rod: 2 to 80 mm

Square Rod: 4 to 30 mm

Hexagonal Section: 4 to 30 mm

Chemical composition

AlloyDenominationApplicable Standards
ISOASTM USADIN GermanyJIS JapanBS England
TPCTough Pitch CopperCu-ETPC11000E Cu 58C1100C 101
DLPPhosphorus-Deoxidized, Low Residual PhosphorusCu-LDPC12000SW-CuC1201
DHPPhosphorus-Deoxidized, High Residual PhosphorusCu-DHPC12200SF-CuC1220C 106
70BCartridge Brass, 70%CuZn30C26000CuZn30C2600CZ 106
65BYellow Brass, 65%CuZn35C27000CuZn36C2700CZ 107
63BYellow Brass, 63%CuZn37C27400CuZn37C2720CZ 108
FCDFree Cutting and DrawingCuZn39Pb3C38500CuZn39Pb3C3603CZ 121
FBForging BrassCuZn38Pb2C37700CuZn38Pb2C3771CZ 128
FB2Forging BrassCuZn40Pb2C38000CuZn40Pb2CZ 122
FCRFree Cutting and RivetingCuZn36Pb3C36000CuZn36Pb3C3601CZ 124
FMRFree Machining and RivetingCuZn35Pb1C34000CuZn35Pb1.5C3501CZ 118
AMBAluminum Manganese BronzeC67400
AMB2C67420CuZn40Al2

 

STANDARDS

We are proud to claim that CSP products are manufactured according to international standards. Our copper and copper-all oy sections are in compliance with the following standards.
  • Copper semi-finished products according to DIN 1787.
  • Round Rod of Copper and Wrought Copper Alloys; Extruded, Dimensions according to DIN 1782.
  • Round Rod of Copper and Wrought Copper Alloys; Drawn, Dimensions according to DIN 1756.
  • Wire of Copper and Wrought Copper Alloys; Drawn, Dimensions according to DIN 1757.
  • Rectangular Bars of Copper and Wrought Copper Alloys; Drawn, with Sharp Edges Dimensions, Permissible Variations, Static Values accord ing to DIN 1759.
  • Square Rod of Copper and Wrought Copper Alloys; Drawn, With Sharp Edges Dimensions according to DIN 1761.
  • Hexagon Rod of Copper and Wrought Copper Alloys; Drawn, With Sharp Edges Dimensions according to DIN 1763.
  • Wrought Copper Alloys Copper-Zinc Alloys (Brass), (Special brass); Composition according to DIN 17660.
  • Wrought Copper and Copper Alloy Rod and Bar; Properties according to DIN 17672.
  • Specification for Copper Rod, Bar, And Shapes Metric (Withdrawn 1994) according to ASTM B133M.
  • Specification for Copper and Copper-Alloy Forging Rod, Bar, and Shapes according to ASTM B 124.
  • Specification for Brass Wire according to ASTM B 134
  • Specification for Free-Cutting Brass Rod, Bar, and Shapes for Use in Screw Machines [Metric] according to ASTM B 16M.
  • Copper and copper alloy rods and bars according to JIS H 3259.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Copper sections”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Company Policies
Inquiries

General Inquiries

There are no inquiries yet.