2EDB-70 Jet Heater
$0.00The Jet Heater Model 2EDB-70 is equipped with Chimney as well as capability of double engine. The unit run on gas and diesel fuel at the same time according to its application and equipped with thermal sensor and flow switch that prevent to temperature rise of 140 degree Celsius (Overheat safety shut-off) and ensure the unit safety. The heater providing the desired warmth and comfort for Greenhouses and industrial due to bring fresh air from outside and exhaust polluting gases through chimney. The existence of 100-liter fuel tank of the unit provides the user to use the operation as a portable. Thermal capacity is 70.000 kcal/h, the quantity of the air flow is 5000 m3 and provide heating space up to 700 – 2000 m3.
3 Blade Circulation Fans NTA363
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
4 Blade Circulation Fans NTA447
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
4 Blade Circulation Fans NTA457
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
6 Blade Circulation Fans NTA657
$0.00The Circulation Fan is designed to the movement of air and uniform temperature and humidity and its ideal for industrial halls, greenhouses, mushroom production halls, Poultry Farms, and Live Stocks. This fan is installed on the ceiling and high altitude below the roof of halls. The circular fan reduces the pressure loss by improving the performance of the main ventilation system and increasing the efficiency of cooling systems (coolers) and pro-fan and heating systems such as a fan heater and jet heater.
Air Inlet
$0.00These types of ducts are located on the upper side of the wall to allow air to be combined with the air in the upper part of the hall. In cold weather, the cold air blends out of the inside with warm air, thus saving fuel and maintaining the desired temperature. The proper airflow is possible when the inlet valves are opened and closed properly.
Axial Evaporative Cooler SE310
$0.00Cooler type: Rear window, side cover, cardboard
Consumption type: Class D
Motor power: 1/10 hp
Length: 65 cm
Width: 65 cm
Height: 79 cm
Weight: 30 kg
Ventilation rate: 2550 cubic meters per hour
Battery capacity: 33 liters
Sheet type: Galvanized
Cold Plasma for Food Processing
$0.00Introduction
Evaporative Air Cooler Down-Draft
$0.00The Evaporative Air Cooler model NTAC3/150D is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Air Cooler Side-Draft
$0.00The Evaporative Air Cooler model NTAC9/180F is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
Evaporative Air Cooler Up-Draft
$0.00The Evaporative Air Cooler model NTAC9/180U is the first evaporative air cooler produced in Iran. This unit with its unique design has wide use in both household and industrial applications. The polymer body and dramatic weight loss of the device make it resistant to atmospheric conditions and direct light exposure. Using the Higher-efficiency of cellulose evaporative cooling pads causes a high absorbent (water) so adequate cooling will be provided. Moreover, it isn’t necessary to replace the swamp cooler pad each year.
The existence of a drain pump in this unit provides the user to drain water automatically in areas with very hard water.
Evaporative Cooler SE280
$0.00Power Supply: 220 – 240,50 v~Hz
Current(high mode): 0.9 A
Current(low mode): 0.7 A
Energy class: D
Length: 500 mm
Width: 500 mm
Height: 500 mm
Net Weight: 21 kg
