Plastic Tray Code-230-Product
$0.00Product Name: Abs fast food tray
THE CODE : 230
OBOBaad: 270 In 360 Mm
number in the box: 24 number
Type of Material: Plastics
Ladle Melamine Dishes
$0.00PRODUCT OF MY : LADLE
THE CODE : THE-05
NUMBER IN THE BOX : 72
MATERIAL GOODS : MELAMINE
COLOR : WHITE, YELLOW, RED AND GREEN
Large Round Bowl B-922-Melamine Dishes
$0.00PRODUCT NAME : ROUND BOWL
THE SIZE OF THE : GREAT
THE CODE: B-922
NUMBER IN THE BOX : 56
MATERIAL : MELAMINE
COLOR : WHITE, YELLOW, RED AND GREEN
Bitumen Emulsion|Bitumen & Tar
$0.00Bitumen Emulsions are Basically an O/W – Oil on Water Solution – A Dispersion of Bitumen Particles on Water, Stabilized with the Addition of Surfactants – Surface Active Agents – or Most Commonly known as Emulsifiers, that Will Permit the Bitumen to De Diluted in Water. They are Primarily Used for Tack Coats for use in Between Hot Mix Asphalt Lyers and Prime Coats for Thin Hot Mix Surfacing Layers or a Chip Seal Pavements.
Air Blowing Bitumen Bitumen & Tar
$0.00Production of Bitumen Product in Iran and World by Blowing Method and Straight Run Method. The Air Blowing Bitumen is Produced by Process of Vacuum Bottom (VB) and Air in the Reactor and Due to the Control of the Process Conditions, Different Grades are Produced.
Construction Application Area Polymeric
$0.00Today, the use of polymers has significantly increased in the construction industry. Due to their light weight and superior performance and quality, such materials have replaced some old materials and substances.
Having a profound technical insight into the current needs in construction industries, Plus Polymer Company has made dramatic achievements in decreasing raw material consumption, lowering the weight of final products, enhancing impact resistance as well as flexural strength, eliminating distortion and shrinkage, and also reducing final costs. The polymeric additives introduced by Plus Polymer could be used in a variety of substances and materials in the construction industry. Some of the intended uses are as follows.
Power Meter Active Fiber Optics
$0.00Power meter: FPM-302
The EXFO FPM-302-FOA-54 Fiber optic Power Meter SC is a handheld optical power meter with an SC connector configuration that that can be used to examine a variety of electrical and fiber optic networks. It integrates the FLS-300 Light Source and FOT-300 Optical Loss Test Set to increase its versatility and breadth in troubleshooting and evaluating installations. These units can be used to transmit a wavelength-identification digital encrypted protocol which allows the FPM-302 to use the proper calibration parameters, decreasing error and making communications simpler.
The FPM-302 line is capable of testing PONs at the 1310, 1490, and 1550 nm wavelengths with a power range of 10 to -60 dBm (uncertainty of ±5%) and a resolution of 0.01 dB. This device is also capable of performing automatic offset nulling, automatic wavelength recognition, tone detection at a 270Hz level, and has a refresh rate of 3Hz. The FPM-302 offers a total of ten calibrated wavelengths with the associated reference values and has power autonomy measured at over 300 hours.
Power Source Active Fiber Optics
$0.00Power Source: FPM-602
Automatically uses the proper calibration parameters when combined with the FLS-300 or FOT-300 source units.
With a high-power option and 10 calibrated wavelengths, the FPM-300 is the most complete, yet simple power meter available. Combined with the FLS-300 or FOT-300 source units, which can transmit with a wavelength-identification digital encrypted protocol, the FPM-300 automatically uses the proper calibration parameters. This auto-wavelength recognition feature reduces the need for communication between the two technicians and decreases the potential for error.
Star Design Floor Covering Model 40*40 Concrete
$0.00
Forouhar Curb Model 35*50 Concrete
$0.00
Potassium Fertilizer
$0.00Potassium
