Elevator Frame

$0.00

Elevator frame is a standard and reliable product .

Designing and manufacturing of custom frames appropriate to the building or layout.

Designing without sharp points on all levels for better safety and quality.

Considering the elevator installation standard (easy and safe)

Complete cut with a laser machine without the use of scissors and punches.

Bending with CNC bending machines.

Use of CO2 welding and electrostatic paint in all levels.

Use of standard and galvanized bolts (clamps, washers and chambers).

Complete assembly and disassembly of products with special bolts.

Emulsion Resins

$0.00

Acrylic resins are the product of condensation polymerization of acrylic, methacrylic acids and their derivatives. The use of water based resins is one of the appropriate methods to reduce the amount of organic solvents consumed and as a result toxic volatile. Water based acrylic resins are used in paint, concrete, adhesion, textile industries, etc.

Emulsions-Bitumen & Tar

$0.00

Whatever the end use, application conditions usually require bitumen to behave as a mobile liquid. In principle, there are three ways to make highly-viscous bitumen into a low-viscosity liquid:

  • Heat it
  • Dissolve it in solvents
  • Emulsify it

Bitumen emulsions are two-phased systems consisting of bitumen, water, and one or more additives to assist in formation and stabilization and to modify the properties of the emulsion. The bitumen is dispersed throughout the water phase in the form of discrete globules, typically 0.1 to 50 microns in diameter, which are held in suspension by electrostatic charges stabilized by an emulsifier. Bitumen emulsions can be divided into four classes. The first two are, by far, the most widely used:

  • Cationic emulsions
  • Anionic emulsions
  • Non-ionic emulsions
  • Clay-stabilized emulsions

The terms anionic and cationic stem from the electrical charges on the bitumen globules. This identification system originates from one of the fundamental laws of electricity – like charges repel, unlike charges attract. If an electrical potential is applied between two electrodes immersed in an emulsion containing negatively charged particles of bitumen, they will migrate to the anode. In that case, the emulsion is described as “anionic”. Conversely, in a system containing positively charged particles bitumen, they will move to the cathode and the emulsion is described as “cationic”. The bitumen particles in a non-ionic emulsion are neutral and, therefore, will not migrate to either pole. These types of emulsion are rarely
Bitumen emulsions are divided into three categories in terms of setting:

  • Rapid-setting (RS)
  • Medium-setting (MS)
  • Slow-setting (SS)

Cationic RS emulsion is currently the widely used category in Iran. Emulsion setting is irreversible phenomenon which may occur due to the evaporation of the water phase or the attraction of water by stone materials. Throughout this phenomenon, the water phase disappears and bitumen particles will have less space. Then, the bitumen gradually moves towards the surface or coats the aggregate.

Cationic Emulsions
These emulsions are known as cationic because their bitumen aggregates carry positive charges by using Ammonium salts or Amines compounds. They are divided into the following categories:

Enameled Plate & Vase Gift

$0.00

About Enameled Plate & Vase Gift 

The art, innovation, and beauty of this package along with unrivaled Arnika saffron get the attention in a way that is impossible to ignore it.

This package contains a crystal pot having 10 g. Negin saffron along with an enameled plate and vase all placed in Termeh box.

Engraved Persian Copper Wall Hanging Plate 105

$0.00

Information

Dimensions

16.5×16.5×3 cm
Approximate weight

160 Gram

Place of production

Iran
Washability

By hand

Application

Decorative
Material

Copper

Handling time

7 Days
Glazed veneer

Yes by Copper

Model

105

 

Engraved Persian Handmade Copper Vase, Hakhamanesh

$0.00

Information

Dimensions

17×11.5×11.5 cm
Approximate weight

500 Gram

Place of production

Isfahan
Washability

By hand

Application

Decorative
Material

Copper

Handling time

7 Days
Glazed veneer

Yes by Tin

Model

Achaemenes

 

Enriched Spaghetti with Vitamin B – 900 gr

$0.00
NutrientsPer 100 g
Fat (g)0.48
Energy (kcal)342
Protein (g)13.54
Sugar (g)0
Carbohydrate (g)73.60
Fiber (g)2.72
Salt (NaCl) (mg)16
Vitamin B1(mg/kg)1.34
Vitamin B2 (mg/kg)0.7
Vitamin B3 (mg/kg)77.94

Envelope Stick Packs Pouches Packaging & Printing

$0.00

Envelope is a proper packaging for different kinds of tea and herbals with the ability to preserve the aroma, taste and color and can be designed in different sizes with various layouts.

Erw Black Steel Pipes Metals & Minerals

$0.00

Our products comprise of a variety of Electric Resistance Welded (ERW) pipes, with diameters ranging from 12 to 220 mm, and wall thickness of 0.8 to 7.1 mm along with comparable square and rectangle tubes.
Specifications include, but not limited to, ASTM A53, and IRAN standards including 7335, 7337&7338, and 7336.

Esomeprazole

$0.00
Model :Solids
Company name :Temad Co
Packaging :
Minimum order :1
Standard :ISO 45001:2018, GMP PRM-98-11
Production power :

Essence and Flavorings

$0.00

It is so important to choose a flavoring or essence which has good stability in different conditions . Flavorings and essences are all natural and suitable to Iranian taste.