rebbr
$0.00| row | size(mm) | length(m) | weight of each branch(12m) | the number of branch per bounch | analyze |
| 1 | 8 rebar size | 12m | 5 | 400 | A3 |
| 2 | 10 rebar size | 12m | 7.8 | 260 | A3 |
Round bar wire rod
$0.00SAE 1006 and SAE 1008 wires are also classified as low carbon steels. The parameters related to the hot rolling process for this group of wires are different from the previous samples due to their different chemical analysis and microstructure. The chemical analysis as well as the mechanical properties of these wires according to ASTM standard are presented in the table below.
Sanitary Tube Metals & Minerals
$0.00Since 1940’s, copper has become the pre-eminent plumbing material in the developed countries of the world. Nowadays contamination of drinking water via plastic piping increasingly recognizes as a potentially serious problem.
The unique characteristics of copper piping combining long trouble-free service life, safety and weight savings due to the ability to use smaller diameters and its recyclability even after long time used readily explain the success of copper in building applications.
The main properties that make copper tube as a preferred material for domestic water services include the following:
Ease of Installation, Ability to be easily Joined and Manipulated, High Strength beside good Toughness and Ductility, Ultra cleaned inner surfaces, Corrosion Resistance, Suitability for use with Potable and Other waters, Potential as Bactericide, Bio-Fouling Resistance and availability in a wide metric sizes compatible with fitting and other system components.
Soudronic Wire Copper Wire
$0.00Technical Specification
- Single wire
- Annealed (or hard : according to the order)
- Tensile Strength 245∼285 MPa
- Elongation (A250) 22∼28%
- Resistivity (20°C) < 0.15328 Ωg/m2 (<0.017241 Ωmm2/m)
Stainless Steel U-Tubes Pipe
$0.00Size Range: OD 19_35 mm, WT 1.6_3.5 mm, L Max 15000 mm
Operative Standard & Grade Standards:
Bending Standard: TEMA &API 660
Type of End‐Finish: Beveled Both Ends or Plain Ends
Coating: Passivation and oiled, Black paint or varnish
Tests and Reports: Tubes are tested according to the standard’s specifications.
Steel Ingot 3SP Steel Billet
$0.00Steel Ingot 3SP Steel Billet
application:
Used in the construction industry, including manufacture of grider, angles and drainpipe.
Steel Ingot 55Cr3 Steel Billet
$0.00Steel Ingot 55Cr3
application: This alloy is highly used in the manufacture of spring steels, which has high tensile strength and resistance to abrasion and vibration under high pressures.
Steel Ingot 5SP Steel Billet
$0.00Steel Ingot 5SP
application: Used in the construction industry, including manufacture of plain bars and angles.
Steel Ingot C50 Steel Billet
$0.00Steel Ingot C50
High quality medium carbon steel is used in forging automobile and engine components, screws, shafts, cutting tools, and hammers. Its high hardness and strength is acquired through performing tempering and quenching operations
Steel Ingot Ck45 Steel Billet
$0.00application:
this alloy is in the category of thermal simple steels medium carbon which is used in the manufacture of pump shafts and medium pressure components. Due to the low percentage of chromium, the compounds of this steel are not resistant to corrosion and rust. This steel is used in the manufacture of agricultural tools, machine shafts, screws, crankshafts and gears. In order to use this alloy in agricultural and tillage components, surface hardening operations which is mostly at reasonable price can be done to increase abrasion and impact resistance
Steel Ingot Ck60 Steel Billet
$0.00Steel Ingot Ck60
application:
This alloy can be used for cases in which necessity for developing abrasion indicators and strength levels are more required than lower carbon rows such as agricultural implements, blades of agricultural tools, hammers, heavy machinery parts, shafts, torsion rods and Wrenches.
